Many people may ask: "What is the installation method of rear tow
hook? "The first thing is to find the right location. Many cars have hooks under the bumper, and the location is indicated in the car manual, where the round or square cover is used to cover the trailer hook. Generally, you can find an Angle to open by pressing along the sides of the trailer hook cover. If you can't open it, you need to use tools to find a small stick with a diameter smaller than the cover of the drag hook, and gently poke around to open it.
The following is the installation method of the trailer
hook:
1. After the trailer installation can traction car, trailer trailer, and can also be matched with the installation of some rear loading since the driving frame, luggage, etc., with these equipment,vehicle carrying space can be expand.
2. Although the brands of various small trailers are different, the way of interface connection is same. And after the tow
hook connection is completed, the circuit also needs to be connected.
3. Whether it is an RV or a trailer, there is a safety wire at the place where the tow hook is connected. After the tractor is connected with the tractor through the tow hook, the safety wire is also needed to be hung on the rim next to the tow hook. This safety wire can avoid sending accidents.
